Industrial Water Treatment Systems

With industrial water purification, the purification process can be performed at higher capacities. High-capacity water purification working with the reverse osmosis system are frequently preferred in areas such as all workplaces and industrial establishments, as they are much more economical and practical than the use of ready-made water.

The places where water is consumed the most are collective living areas, therefore workplaces. For this reason, the water preferred for workplaces must be healthy, fresh and constantly available. At this point, Oveon Water Treatment Systems aims to deliver the highest quality water to users in the most economical way, with models developed for office type workplaces and under counter and industrial establishments.

Especially nowadays, the increasing demand for domestic water treatment is also increasing by the industrial water treatment, due to the high cost of carboy water and the fact that it does not give confidence to the consumer in terms of health. In order to meet all these demands, Oveon Water Treatment Systems brings together the first class water purification it imports to consumers at affordable prices without sacrificing quality.

Industrial water purification, which can produce an average of one ton of water per day, can be used with direct flow, as well as keep the purified water cleanly with stainless steel pressure tanks that can be used in various sizes.

In industrial and domestic areas, water softening are generally preferred. Water softening systems automatically perform the renewal process without requiring any intervention at the desired day and time of the month or week. The resin, which reaches saturation in a time-controlled manner, regenerates with salt water and is cleaned of Mg (Magnesium) and Ca (Calcium) ions. Flow-controlled softening systems measure the amount of water passing through a counter on the and subject it to a pre-programmed regeneration process. The resin that reaches saturation enters into regeneration with brine with a flow rate controlled and calcium and magnesium ions are removed from the water.

Tandem type are ideal for facilities that need soft water 24 hours a day. On the system; It has two resin columns, cationic resins, automatic valves and salt tank. In tandem (Duplex System) water softening systems, automatic valves operate based on flow control. When water passes through the resin tank in service at a certain flow rate, it automatically switches to regeneration, while the other tank moves to the service position and continues to supply soft water to the installation. In this way, it produces uninterrupted soft water 24 hours a day without the need for human intervention and without stopping the process for regeneration processes.